Good Quality School Furniture Green Board - Manual Edge Banding Machine PDF board – Xinda
Product General Information
Good Quality School Furniture Green Board - Manual Edge Banding Machine PDF board – Xinda Detail:
The manual edge banding machine adopts the automatic control, the operation range of edge banding is large, which can ensure that the hot melt adhesive does not paste and does not leak. It is suitable for the straight curve edge banding of various plates, with small volume and light weight. It is one of the edge banding machines that have entered the Chinese market as early as possible. It is suitable for all kinds of furniture, cabinets and teaching aids factories.
Double sided coating technology
Double sided gluing is to evenly apply hot-melt adhesive on the edge banding strip and the board, so that more glue can be contained between the edge banding strip and the board, and the adhesive is more firm, which can not be torn off after cooling, and will not fall off and crack after several years.
Large telescopic rocker arm
Telescopic support rocker arm, plate push more labor-saving!
Three functions of automatic / timing / instant tape break
1. The linear plate can be sealed by using the automatic feeding / breaking function of the travel switch, which is convenient for operation.
2. For batch sealing of the same size of plates, the timing belt breaking function can be set by microcomputer to improve efficiency.
3. For sealing of different plates, the foot switch can be used to control the feeding / breaking belt immediately, with precise control.
2） Technical parameters
Model: microcomputer numerical control curved line trimming edge banding machine hz-08
Power supply 220V 50Hz
Belt feeding speed 0-18cm s
Air supply pressure 3-6kg C ㎡
Edge banding thickness 0.3-3.0mm
Edge banding width 10-50mm
Small arc 18mm
Edge sealing method: double-sided gluing
Speed regulation mode: electronic stepless speed regulation
Heating time: About 8min
Weight: about 80kg
Size 770 * 600 * 680mm
Product detail pictures:
Related Product Guide:
Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" as well as theory of "quality the basic, have faith in the initial and administration the advanced" for Good Quality School Furniture Green Board - Manual Edge Banding Machine PDF board – Xinda, The product will supply to all over the world, such as: Singapore, Qatar, Ecuador, With more and more Chinese products and solutions around the world, our international business is developing rapidly and economic indicators big increase year by year. We have enough confidence to supply you both better solutions and service, because we've been more and more powerful, specialist and experience in domestic and international.
moterial and technical
*The table and chair frame are made of oval steel cold drawn welded pipe, the steel pipe specification is 49×20×1 oval pipe, and the iron sheet: 1mm thick cold rolled sheet is stamped and formed. The desktop is made of high-quality multilayer board with a thickness of 16mm, and the chair surface is made of multilayer plywood with a thickness of 16mm. The iron parts are welded with carbon dioxide gas shielded welding, and the surface of the steel pipe is degreased, derusted, phosphatized, electrostatic sprayed, and cured at high temperature.
* Student desks and chairs are made of steel and wood. Classroom, chair panel and chair backboard are made of multi-layer plywood with fireproof veneer on the surface. The thickness of the tabletop is not less than 16mm and the thickness of the chair surface is not less than 9mm. The material of the desk and chair legs is: 40×20×1.2 (mm ) High-quality square steel pipes;
*Materials of desk bucket parts and side board parts of classroom chairs are: 1mm thick cold rail steel plate;
*The material of the backrest of the class chair is: 19×1.2 (mm) high-quality round steel tube
*The material of the desk and chair foot cover is: 40×20×4 (mm) plastic.
1. Seat board and back board: Multi-layer board is formed by hot press molding, and the surface is adhered with beech veneer or fireproof board, and then refined by spray painting or PU edge sealing. It is firm and durable, and does not fade.
2. Writing board and laminate: Multi-layer board is formed by hot-pressing with a mold, the surface is sticked with beech veneer or high-density fiberboard, and the cold-pressed fireproof board is made of refined, spray-painted and PU edge-sealed. It is durable and does not fade.
3. Tripod: It is made of high-quality steel, stamped, welded, and finely ground by the mold. The surface is then anti-static and electrostatically sprayed to prevent rust. At the same time, fixed or movable devices can be produced according to customer requirements.
4. Book net rack: It is made of cold-bonded iron, formed by mold, welded, finely ground, and then rust-proof and electrostatic sprayed on the surface, which is practical and firm, and bears a large pressure.
5. Sturdy gong wire: Adopt electrostatic spraying cylindrical head hexagonal gong bar, strong, durable and non-rusting.
6. Appearance design: It adopts ergonomic concept and individual requirements, with beautiful appearance and modern characteristics.
The installation needs to be equipped with common tools such as wrenches and screwdrivers, as well as a rivet gun (for fixing rivets) and a handlebar electric drill (for drilling holes in the bench plate).
We have excellent production design and manufacturing team and third-party quality management system guarantee, and more perfect after-sales guarantee, so that you can shop more worry-free and more at ease.
A real manufacturer, a real direct sales, a real benefit to consumers, reflects the strength, as long as the customer provides pictures with any functional requirements, we can process production to meet the needs of consumers.
we have past all ISO certificates and others inspection
our production ability
Our company’s main factory has a monthly output of 10,000 sets of standard student tables and chairs and various other teaching equipment. In addition, we have four accessory manufacturers that can provide a variety of educational equipment accessories. Large amounts give discounts.
about packing and delivery:
Our company has export business all year round, and has long-term cooperation agreements with various logistics companies, which can fulfill customers’ various purchase orders and outbound transportation service requirements.
Is your company a OEM & ODM factory?
Yes, we are a factory with a production capacity of 40,000 single-person student tables and chairs per month;
Excuse me, where is your company and where does the ocean export come from?
Our factory is less than 100 kilometers from Tianjin and Beijing, and shipping containers are loaded in Tianjin Xingang port;
Does your company accept customized products?
We accept customized products, and the purchase quantity of each product is not less than 500 sets. It takes 5 working days to make a sample according to the drawing. The sample fee is 50% of the wholesale price determined by the two parties, and the customer pays the courier fee;
Can I buy semi-finished parts for your company?
Yes, and we can purchase new or used production equipment and guide the production and processing of subsequent processes for free.
Does your company accept small orders?
Yes, existing product pictures are available from our website. But the buyer needs to ensure that it has the ability to import customs declaration.
Can your company cooperate with foreign countries to build factories?
Yes, our factory can provide equipment and engineering technicians to fully support product localization. Please contact us for details.
By jari dedenroth from Greece - 2017.05.02 18:28
The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.
By Alan from South Africa - 2017.01.28 18:53